LTS CLAMP TYPE CONNECTORS

Clamp Series - Design based on

ASME VIII Div. 1& 2 Code Rules and

suitable for Pressure Vessel, Pig

Launchers, Heat Exchangers,

Separators, Sand Scrubbers, Closures

and a multitude of Process Piping

applications.

Advantages - LTS Clamp Connectors

are completely interchangeable with

Grayloc® type equivalent manufacturers,

and offer over 80% Weight Savings as

well as significant space savings

compared to standard ASME B16.5

flanges. LTS offers sizes thru 60”

(1,524mm) in comparison to ASME

B16.47 and MSS-SP44 Standards, and

are manufactured in a multitude of

materials.

Size Range - ½” (12mm) thru 60”

(1,524mm). Larger available on request.

Pressure & Temperature - ASME

600lbs thru 4,500lbs, API 5,000# thru

20,000#, and -452ºF (-253ºC) / +1600ºF

 (871ºC).

Materials - SA105, SA350-LF2, A694-

F52-F70, AISI 4130, SA182-F316 (L,H),

SA-182-F321 (L,H), SA182-F347 (L,H),

A182-F51, A182-F55, Safurex, Alloy 625,

Alloy 825, Titanium and Hastaloy.

Gasket - The LTS Clamp Type

Connector uses an all metal                                    8” 2500# Clamp Assembly (Sch. 160)

Seal Ring with over 50 years of                             Total Weight: 228LBS (104KGS)

service history. Seal materials are                                                 vs;

selected based on application and service           8” ASME 2500lbs Flange Assembly (Sch. 160)

conditions. The pressure energized bore            Total  Weight: 1359LBS (618KGS)

Seals are elastic by design, and therefore,           LTS CLAMP SERIES 83% LESS WEIGHT

Reusable.                                                                 (actual scale, weights accurate to +/-2%)

Design & Engineering Support - LTS

provides both ASME and analytical calculation

methods in accordance with Section VIII

Division 1 and 2 methods, as well as ANSYS

FEA analysis supporting dynamic load,

combination loads and thermal load

applications. LTS specializes in High Pressure

and High Temperature solutions and offers

integrated design analysis for skid and piping

systems using in-house  CAESAR II software.

Design Verification - Building on our 

extensive HP/HT experience, LTS offers

Project specific Prototype Testing, as

well as Third Party design review through DNV,

Lloyds, ABS and Bureau Veritas, as required.