|
|
 |
SX012
The SX012 is a lightweight, solid circular drive ring
that utilizes a four jaw individual clamping arrangement
for mounting externally up to 12'' (305mm). |
 |
AX024
The AX024 is a larger version of the SX012 and has a clamping
range up to 23'' (584mm) in diameter. |
 |
OM024
The OM024 Oval Manway machine is designed to repair the
front and back gasket surfaces of elliptical manways.
These are most often found in steam drums and condensers
where access inside the vessel is constricted. |
|
|
 |
AX321
At 58lbs. (26.5kg), the AX321 is the lightest machine
in the Silk range. It is bore mounted and covers flanges
having 3'' (75mm) internal diameters to 21'' (533mm) outside
diameters. |
 |
FXB630
The FXB630 is modular, compact, and of lightweight construction
designed to resurface flanges having 6'' (153mm) internal
diameters to 30'' (762mm) outside diameter. |
 |
AX1445
Internally mounted, this machine has a machining range
from 14'' (355mm) to 45'' (1140mm) and also features four
automatic, continuous feed rates. |
 |
AX2872
Often used for refurbishing
heat exchanger gasket surfaces this machine covers a range
of flanges having 28'' (710mm) internal diameters to 72''
(1828mm) outside diameters.
The AX2872 complete with tube sheet mounting
arrangement, back facing arm and counter balance weights
|
 |
AX48120
This is the largest internally mounted
machine in our current range. It can mount inside flanges
having 48'' (1219mm) bores and can machine out to over
120'' (3048mm) in diameter. |
|
|
 |
FM044/FM066
MILLING RAILS
These
lightweight, portable two axis milling machines offer
a number of on-site milling applications. Available in
two rail lengths, 44’’ (1118mm) and 66’’ (1676mm), they
are suitable for use on the division plates of heat exchangers,
pumps, and motor foundation plates, as well as milling
slots in keyways. |
 |
SILK
MULTI AXIS MILL
The
Multi Axis Mill features a rigid cast iron bed, dovetail
slide, and overarm assembly. The machine comes in two
working lengths of 60” (1524mm) and 80” (2032mm) with
an option to combine two bed lengths for a maximum bed
length of 140” (3556mm). |
|
|
 |
HD100
DRILL
This rugged, lightweight, positive-feed drill is designed
for applications involving repetitive drilling and tapping.
Capable of being carried and used by one person, it consists
of a single main spindle assembly incorporating a drive
gearbox. |
 |
HD400
DRILL
The HD400 has been designed as a heavy-duty version of
the HD100 with drilling and boring capabilities up to
10'' (250mm) in diameter. |
 |
DEX
BORING & DRILLING MACHINES
The DEX series of drills are offered of two standard sizes,
featuring a two speed gearbox, automatic downfeed with
manual override, and drilling head that travels on a dovetail
slide. |
|
|
 |
AXBB BORING / FACING MACHINE
The AXBB machine is ideal for line boring and facing applications
and is offered in a standard 40'' (1016mm) length covering
diameters from 4'' (101mm) to 18''(457mm).
AXBB and SX012 drive ring
|
BB624
and AX024 drive ring
|
BB624
BORING / FACING MACHINE
The
BB624 machine utilizes a 4'' (101mm) diameter boring bar
used in conjunction with the AX024 drive ring for applications
involving internal facing and boring.
BB624 refurbishing main
recirculation pump |
|
|
 |
VSPM
VALVE SEAT PARTING MACHINE
The
VSPM machine is designed to repair Parallel Gate valves
10'' (254mm) and above to specifically cut out or refurbish
existing seat rings. Machining is done in place, having
all controls accessible from the top of the valve.
Parallel Gate valve set-up |
 |
SVMM
SILK VALVE MILLING MACHINE
Fully
computerized design capabilities are offered to allow
for 3D pictorial views such as this rendering of the Valve
Milling Machine. |
|
|
 |
MID-SHAFT
TURNING MACHINE
The
Mid-Shaft Turning machine has a split ring drive design
that rotates and feeds the toolpost along linear rails.
Machines are offered to suit shaft diameters of 12''-18''
(305mm - 457mm) and 18''-26'' (457mm - 660mm) with a variety
of different shaft lengths. |
 |
SILK
BANDSAW
Built
specifically for Nuclear Power Station decommissioning,
the Silk Bandsaw is designed to cut apart a reactor. Made
from stainless steel, the Bandsaw can be used completely
submerged in the reactor pool and features remote control
operation. |
 |
SSR
The
SSR is designed to cut in half and profile machine weld
bevels in nuclear reactors having diameters up to 25ft
(7.5m) via a remote control panel. The machine can be
utilized fully submerged in the reactor pool and achieve
setup and working tolerances within .001'' (0.025mm).
A modification will allow the SSR to cut up the reactor
in sections via independent remote control operation.
|
|
|
